
Filefctory | Uploaded.to | English | Team: N/A | .flv | 4.39 GB
Over the course of this 3ds Max tutorial we will look at the efficient application of the various modifiers that are available in 3ds Max and how we can use them to speed up a hard surface modeling workflow. Throughout these lessons we will discover ways of troubleshooting problem topology and learn how to reproduce a 3D model from a perspective reference illustration. By the end of this tutorial you will have learned efficient modeling workflows in 3ds Max.

Lesson 1
Introduction and project overview 01:27
Lesson 2
Reviewing our concept image 05:54
Lesson 3
Setting up our environment 10:57
Lesson 4
Starting to shape the main body 11:13
Lesson 5
Roughing in the proportions 11:03
Lesson 6
Setting up placeholders for the wings 12:05
Lesson 7
Creating basic shapes for the cockpit 13:22
Lesson 8
Developing of a cockpit area 11:32
Lesson 9
Laying out the cabin shape 11:41
Lesson 10
Working with the belly of the plane 12:09
Lesson 11
Defining the components 11:52
Lesson 12
Adjusting minor components 12:37
Lesson 13
Development of an underbody panel 10:47
Lesson 14
Refining the bottom area and merging elements 14:28
Lesson 15
Modeling the engine and wings hub 16:44
Lesson 16
Refining of the main body 13:54
Lesson 17
Breaking down the main body shape into separate components 09:44
Lesson 18
Creating additional panels for the body 14:08
Lesson 19
Troubleshooting some topology issues 11:12
Lesson 20
Continuing to develop the main body 11:58
Lesson 21
Correcting the top panel 10:00
Lesson 22
Starting to refine the cabin 14:51
Lesson 23
Continuing to refine the shape of the cabin 10:57
Lesson 24
Separating the cabin into panels 10:20
Lesson 25
Creating new elements for the cabin 10:47
Lesson 26
Fitting the cabin trim to the body 11:37
Lesson 27
Working with the top components of the cabin 14:13
Lesson 28
Creasing the roof of the cabin 13:55
Lesson 29
Finishing the cabin modeling 20:00
Lesson 30
Fixing some issues that arose while modeling the cabin 09:35
Lesson 31
Building docking doors 10:17
Lesson 32
Modeling the side doors for the loading dock 12:04
Lesson 33
Segmenting the body of the shuttle 09:39
Lesson 34
Building a place for the engine 12:39
Lesson 35
Creating the bottom of the shuttle 14:48
Lesson 36
Finalizing the engine compartment 14:21
Lesson 37
Starting to build the rocket engine 14:41
Lesson 38
Building the engine exhaust section 11:03
Lesson 39
Creating mounts for the exhaust section 14:16
Lesson 40
Finilizing the engine compartment 14:11
Lesson 41
Finalizing the bottom components 09:18
Lesson 42
Finalizing the side components 18:17
Lesson 43
Creating inserts for the smaller wings 12:06
Lesson 44
Creating the front fin 09:33
Lesson 45
Creating the rear fin
Home: http://www.digitaltutors.com/11/training.php?pid=702
Filefactory:
http://www.filefactory.com/file/ai5eeul79zd/n/DTCDHSMWi3dsM_01.rar
http://www.filefactory.com/file/6m37hiehsw39/n/DTCDHSMWi3dsM_02.rar
http://www.filefactory.com/file/2fndy0qcwygt/n/DTCDHSMWi3dsM_03.rar
http://www.filefactory.com/file/22ut22wkfc69/n/DTCDHSMWi3dsM_04.rar
http://www.filefactory.com/file/h5xabiga77r/n/DTCDHSMWi3dsM_05.rar
http://www.filefactory.com/file/62zs3ep5wg1t/n/DTCDHSMWi3dsM_06.rar
http://www.filefactory.com/file/5idqx2cnxyrf/n/DTCDHSMWi3dsM_07.rar
http://www.filefactory.com/file/2tzh2zdjvqdj/n/DTCDHSMWi3dsM_08.rar
http://www.filefactory.com/file/3cs0kfg45zif/n/DTCDHSMWi3dsM_09.rar
http://www.filefactory.com/file/5u5min4xkumt/n/DTCDHSMWi3dsM_10.rar
Uploaded.to:
http://ul.to/6fggx87z/DTCDHSMWi3dsM_01.rar
http://ul.to/vv479xp9/DTCDHSMWi3dsM_02.rar
http://ul.to/42hltv3c/DTCDHSMWi3dsM_03.rar
http://ul.to/6oyt4000/DTCDHSMWi3dsM_04.rar
http://ul.to/ylors7n5/DTCDHSMWi3dsM_05.rar
http://ul.to/4qmzjs9c/DTCDHSMWi3dsM_06.rar
http://ul.to/lu5p9764/DTCDHSMWi3dsM_07.rar
http://ul.to/jtw30dnl/DTCDHSMWi3dsM_08.rar
http://ul.to/4v6awbw5/DTCDHSMWi3dsM_09.rar
http://ul.to/z9cxiji1/DTCDHSMWi3dsM_10.rar